20mm Through 2 way box, Galvanised

Waterproof putty for all galvanised underground boxes

Cable warning tape for all buried cable, 365m Roll

It is mounted atop a 700mm pole. Light is emitted on a horizontal plane around 360 degrees via a 5, 10 or 20 watt halogen capsule and does not project any vertical light. Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours matt black, green, metallic silver, metallic bronze and white) or solid copper with high temperature silicon gaskets, UV stable acrylic lens and anti-glare hood. Suitable for use with a G4 bi-pin halogen capsule 5, 10, or 20 watt and is supplied with a high quality European lamp.

IP44, Laquered Stainless Steel bollard to house a standard E27 screw lamp MAX 60w c/w clear polycarbonate lamp cover

IP54, Stainless Steel/Wood bollard to house a standard screw cap E27 lamp, 330mm wide

IP65 240v Stainless Steel Walk-over Light, Suitable for use with either GU10 or LED Lamps, Diameter 100mm, Cut out 72mm, Depth 30mm

Medium Recessed Light, can come in either Stainless steel or Copper finishes.Dimensions: Diameter 87mm Depth 113mm Cut-out 62mm. Compatible with Low Voltage IP68 rated (approved for permanent use under water) MR16 (35watt max) or 240volt IP67 rated GU10 (35watt max)

IP68 Rated (approved for permanent use under water)Walk-over Light. Stainless steel bezel. Diecast aluminium body. C/W in-ground sleeve. Pre-wired. Diameter 120mm Cut-out 110mm. Compatible with Low Voltage IP68 rated MR16 (35watt max) or 240 volt IP67 rated GU10 (35watt max)

IP67 in-ground fitting. Maximum drive over speed: 15mph. Stainless steel cover ring. 10mm tempered glass. Painted and pre-treated aluminium die cast base. Nylon installation sleeve. (knock out hole for extra gland). Glass temperature: 56degrees C.(lamp included)

Platho Round ground uplight for MLF7 7w mini fluorescent lamp Width 145mm Depth 188mm, IP67

Platho square ground uplight for MLF7 7w mini fluorescent lamp IP67 rated, Width 145mm Depth 188mm.

Symmetric 70w metal halide groundlight. IP67 in-ground fitting. Maximum static load: 2000kg Maximum drive over speed: 15mph. Stainless steel cover ring. 10mm tempered glass. Painted and pre-treated aluminium die cast base. Nylon installation sleeve. Glass temperature: 160degrees C

Asymmetric 70w metal halide groundlight. IP67 in-ground fitting. Maximum static load: 2000kg Maximum drive over speed: 15mph. Stainless steel cover ring. 10mm tempered glass. Painted and pre-treated aluminium die cast base. Nylon installation sleeve. Extra gland supplied for through wiring. (knock out hole for extra gland). Glass temperature: 140degrees

Platho round ground uplight with white 1 watt LEDs IP67 rated, Width 145mm Depth 188mm

Symmetric 150watt metal halide groundlight. IP67 in-ground light. Maximum static load: 2000kg. Maximum drive over speed: 15mph. Stainless steel cover ring. 12mm tempered glass. Painted and pre-treated aluminium die cast base. Nylon installation sleeve. Extra gland supplied for through wiring. (knock out hole for extra gland). Glass temperature: 130degrees C. (lamp included)

Asymmetric 150watt metal halide groundlight. IP67 in-ground light. Maximum static load: 2000kg. Maximum drive over speed: 15mph. Stainless steel cover ring. 12mm tempered glass. Painted and pre-treated aluminium die cast base. Nylon installation sleeve. Extra gland supplied for through wiring. (knock out hole for extra gland). Glass temperature: 130degrees C. (lamp included)

IP67 70w Lumis black ground light for metal halide lamp Diameter 233mm Depth 424mm

IP67 70w Lumis Stainless Steel ground light for metal halide lamp Diameter 233mm Depth 424mm

Stainless Steel Spike LED Spotlight, IP68 rated. Low Voltage complete with Inbuilt Driver 240V, 2.2W. 15 LED P.C.B. 30,000 hours.

Exterior Spotlight In solid Stainless Steel (SS) and Solid Copper (SC) GU10 IP67 Rated MAX 35W .

IP44, Aluminium case, Glass diffuser with aluminium grille, For BL/01/E27 40 use E27 Lamp 40w Max.(not included), For BL/01/PL9 use 1 x PL9 compact fluorescent lamp(not included)

IP54 Wall mounted light comes in white, satin silver or black, E27 Lampholder MAX 60W, Diameter 22mm

IP65 Stainless Steel Wall light can come with various covers inc. Louvered as shown, plain glass or eyelid, 75W MAX, Width 165mm

IP44, Recessed brick light with E27 40 watt lamp, Stainless Steel surround.

4mm MDPE tubing for use with octimitters,ideal for hanging baskets,pots and greenhouses, sold per meter

Greased filled crimp connectors for joining low voltage cable to solenoids

Grey black 70lt/hr fine droplet sprinkler, 360 degree

Grey black 60lt/hr fine droplet sprinkler, 360 degree

Grey black 90lt/hr fine droplet sprinkler, 360 degree

Grey black 105lt/hr fine droplet sprinkler, 360 degree

Blue 180 degree 40ltr/hr fine droplet nozzle

10 core 0.8mm low voltage signal cable for wiring up solenoid valves. Sold by the metre.

Pro-Spray 10ft spray nozzle

Pro-Spray 7ft spray nozzle

Pro-Spray 12ft spray nozzle

Pro-Spray 15ft spray nozzle

Pro-Spray 17ft spray nozzle

Round reinforced 10" valve box complete with green lid suitable for 1 valve

Rectangular reinforced 12 x 18" valve box complete with green lid suitable for 1- 5 valves

Stainless steel 3/4" bsp threaded inlet and outlet, Ideal for rotaframes and small pro-spray sprinklers. Skid only.

16mm Black LDPE Underground supply pipe, also use for the main pipework for octimitters. Sold in 100m coils.

Rectangular reinforced 14 x 20" valve box complete with green lid suitable for 1- 7 valves

20mm Black MDPE Underground supply pipe,also used for the main supply pipe for octimitters and mini-sprinklers. Sold in 100m coils.

Bermad corrosion-resistant hydraulic control valves 3/4"

Bermad corrosion-resistant hydraulic control valves 1"

25mm Black MDPE Underground supply pipe. Sold in 100m coils.

Simple, flexible & reliable battery opertaed single zone controllers, with 1" inlet and control valve

Simple, flexible & reliable battery operated single zone controllers, with 3/4" inlet and control valve

32mm Black MDPE Underground supply pipe. Sold in 100m coils.

Orbit budget control panel with multiple start times for day to day use, Easy to use and a good all-round panel, 4 station

Orbit budget control panel with multiple start times for day to day use, Easy to use and a good all-round panel, 6 station

Orbit budget control panel with multiple start times for day to day use, Easy to use and a good all-round panel, 9 station

Orbit budget control panel with multiple start times for day to day use, Easy to use and a good all-round panel, 12 station

Irritrol Total Control irrigation controller for use with multicore 24v irrigation systems, capable of controlling 12 zones. Multi start times and programmes for more flexible use, Ideal for landscape and residential use

Irritrol Total Control irrigation controller for use with multicore 24v irrigation systems, capable of controlling 18 zones. Multi start times and programmes for more flexible use, Ideal for landscape and residential use

Irritrol Total Control irrigation controller for use with multicore 24v irrigation systems, capable of controlling 24 zones. Multi start times and programmes for more flexible use, Ideal for landscape and residential use

Dosatron Automatic fertiliser feeders, with dosing adjuster, 10-200ltrs per hr cubed per hr suitable for use with liquid feeds

Dosatron Automatic fertiliser feeders, with dosing adjuster, 500ltrs at 8m cubed per hr suitable for use with liquid feeds

Small stake mounted dripper that can be adjusted from 0-40 ltr./hr Ideal for narrow beds, pots, tubs, rockeries, hanging baskets. For use with 4mm FR39 piping, sold separately (see Accessories)

Hunter Pro-Spray Replacement 4" pop-up Spray type sprinkler for smaller lawn and border areas.1/2" BSP Thread

Small stakes with interchangeable nozzles ideal for watering large and small borders, shrubs, rockeries and roses. Self cleaning nozzles. Click 'Info' for larger diagram. Nozzles sold separately (see accessories)

Hunter Pro-Spray Replacement 6" Spray type sprinkler for smaller lawn and border areas.1/2" BSP Thread

Hunter PGS Replacement sprinkler for borders, rockeries and vegetable plots 3/4" BSP Thread.

Dripline with 300mm spaced filtered outlets suitable for large and small borders. Very versatile and is preferable for shrubs and roses. Water is directed to the roots.(Sold in 100mtr coils)

3 core rubberised low voltage cable for use with all LED and low voltage lights. Sold by the metre.

Low voltage light linkage cable, suitable for use with all 12 volt low voltage transformers

Low voltage light linkage cable, suitable for use with all 12 volt low voltage transformers

Capillary watering provides plants with water through the base of their containers, via the natural capillary action of the compost. The matting can be used with staging trays to deliver water evenly over the whole area. When used with our watering system plants can be kept watered for long periods. Matting can be used either way up; the dark grey side hides soil spills and attracts the sun's warmth in the cooler months; the white side will reflect more light, particularly beneficial for light sensitive plants in the height of summer.

4mm MDPE tubing for use with octimitters,ideal for hanging baskets,pots and greenhouses, sold per meter

Small stake mounted dripper that can be adjusted from 0-40 ltr./hr Ideal for narrow beds, pots, tubs, rockeries, hanging baskets. For use with 4mm FR39 piping, sold separately (see Accessories)

Small stakes with interchangeable nozzles ideal for watering large and small borders, shrubs, rockeries and roses. Self cleaning nozzles. Click 'Info' for larger diagram. Nozzles sold separately (see accessories)

30cm capillary matting

40cm capillary matting

Dripline with 300mm spaced filtered outlets suitable for large and small borders. Very versatile and is preferable for shrubs and roses. Water is directed to the roots.(Sold in 100mtr coils)

50cm capillary matting

60cm capillary matting

4mm MDPE tubing for use with octimitters,ideal for hanging baskets,pots and greenhouses, sold per meter

Small stake mounted dripper that can be adjusted from 0-40 ltr./hr Ideal for narrow beds, pots, tubs, rockeries, hanging baskets. For use with 4mm FR39 piping, sold separately (see Accessories)

16mm black plastic clip for use with 16mm mdpe pipe, sold in packs of 10

16mm Black LDPE Underground supply pipe, also use for the main pipework for octimitters. Sold in 100m coils.

Simple, flexible & reliable battery operated single zone controllers, with 3/4" inlet and control valve

A large collection of assorted parts to fit our micro irrigation kits

Stylised ornamental copper sprinkler. Inner ring spins in opposite direction to outer ring

All the necessary micro irrigation parts to water your vegetable garden. This kit contain 15 drippers and 100 feet of soaker tube

All the necessary micro irrigation parts to water your borders

All the necessary micro irrigation parts to water 5 hanging baskets and 12 individual pots or tubs

Hunter Pro-Spray Replacement 4" pop-up Spray type sprinkler for smaller lawn and border areas.1/2" BSP Thread

Hunter Pro-Spray Replacement 6" Spray type sprinkler for smaller lawn and border areas.1/2" BSP Thread

Hunter Pro-Spray Replacement 12" pop-up Spray type sprinkler for smaller lawn and border areas.1/2" BSP Thread

Hunter PGJ Replacement 4" pop-up small gear driven sprinkler for small & medium lawn areas.1/2" BSP Thread

Hunter PGP Replacement pop-up sprinkler for small & large lawn areas.

Hunter PGJ Replacement 6" pop-up small gear driven sprinkler for small & medium lawn areas.1/2" BSP Thread

Hunter PGJ Replacement 12" pop-up small gear driven sprinkler for small & medium lawn areas.1/2" BSP Thread

Hunter PGH Replacement pop-up sprinkler for small & medium lawn areas. 3/4" BSP Thread

Kit consists:3 x GL12VVNVGC Novalights lights with a 150VA transformer complete with plug and 50m of low voltage cable

Kit consists:3 x GL12VMB05 minature bollard lights with a 150VA transformer complete with plug and 50m of low voltage cable

Kit consists:3 x GL12VSL01Spike lights with a 150VA transformer complete with plug and 50m of low voltage cable

Kit consists:3 x GL12VPL04 Pagoda Spike lights with a 150VA transformer complete with plug and 50m of low voltage cable

Kit consists:3 x Bermuda Spike lights with a 150VA transformer complete with plug and 50m of low voltage cable

Kit consists:3 x GL12VMXS walkover lights with a 150VA transformer complete with plug and 50m of low voltage cable

Kit consists:5 x ML01, 1 x PLU/350 1-9, 100m x CR135 red, 20 x UY2 connectors, Low profile ground light with 1w Luxeon LED. IP68 (approved for permanent use under water) at 1 bar(9m of water). Marine grade (316) stainless steel. Clear epoxy lenses. Sealed for life, Supplied with 1m 0.35mm red and black teflon cable. Use as step light, groundlight or wall light. Suitable for interior, exterior or in submerged locations.

GL019 Kit consist: 5 x GL019 Flood, 1 x PLU/350 1-9, 100m x CR135 Red, 20 x UY2

IP68 (approved for permanent use under water) at 2m Max, Waterproof junction box for parallel wiring of LED or low voltage fittings 24v, 150w Max. 1 input, 1-3 outputs, Use H05RN-F 2 x 0.75mm cable, Cable diameter: 6.5-8.8mm

Low voltage light linkage cable, suitable for use with all 12 volt low voltage transformers

IP44 60va safety transformer, suitable for outdoor use and supplied with a pre-fitted plug and rubber cable

Remote contol for the Tristar system

IP68 2m Max, Waterproof electronic transformer, Supplied with 2m moulded on leads, Only dimmable with trailing edge (electronic) dimmers, Short circuit and over load protected, Thermal fuse, Primary: 230-240v 50Hz 0.46A, Secondary: 11.6v rms Max. 8.8A 35-105w

Low voltage light linkage cable, suitable for use with all 12 volt low voltage transformers

IP44 150va safety transformer, suitable for outdoor use and supplied with a pre-fitted plug and rubber cable

Constant current power supply, Loop in, loop out mains terminals, Input Voltage: 110-240v, Output: 350mA (for 1-9 1w LEDs)

3 x 1watt LED's Fitted into a 50mm MR16 fitting for a powerful decorative light (spotlight)

3 x 1watt LED's Fitted into a 50mm MR16 fitting for a powerful decorative light (floodlight)

5.3 watt colourchange lamp to fit 50mm MR16 fittings, LED unit with a unique colour change system that allows you to pick between 15 different colours, 4 different brightness levels and utilise 4 different colour change programmes (Slave unit). Requires LED Driver and Tristar remote, sold seperately

5.3 watt colourchange lamp to fit 50mm MR16 fittings, LED unit with a unique colour change system that allows you to pick between 15 different colours, 4 different brightness levels and utilise 4 different colour change programmes (Master unit). Requires LED Driver and Tristar remote, sold seperately

Die-cast aluminium spike mounted mini bollard light powder coated in black, MR16 35W max, to be used in conjunction with 12v transformers, Ideal for pathways can be used with LED's

Die-cast aluminium spike mounted pagoda light powder coated in black, MR16 35W max, to be used in conjunction with 12v transformers, Ideal for pathways borders and flower beds, can be used with LED's

The Twig Light has a subtle appearance, which allows it to blend into taller foliage. The fitting has a frosted glass lens to reduce glare and is best operated with a 10 watt or 5 watt halogen capsule, Suitable for use with a G4 bi-pin halogen capsule 5, 10 or 20 watt and is supplied with a high quality European lamp. Available in copper and stainless steel

It is mounted atop a 700mm pole. Light is emitted on a horizontal plane around 360 degrees via a 5, 10 or 20 watt halogen capsule and does not project any vertical light. Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours matt black, green, metallic silver, metallic bronze and white) or solid copper with high temperature silicon gaskets, UV stable acrylic lens and anti-glare hood. Suitable for use with a G4 bi-pin halogen capsule 5, 10 or 20 watt and is supplied with a high quality European lamp.

IP65 640mm high contemporary aluminium bollard with a 1watt LED to create a "radial dot style" effect, Available in five different LED colours

IP65 640mm high contemporary aluminium bollard with a 1watt LED to create a "Halo" effect, Available in five different LED colours

95 x 95mm Solid hardwood post, 1000mm high FSC approved timber 800mm above ground, 200mm buried, Connect in series using JB2 Use power supplyPLU/350 1-9, Luxeon 45° LED module(in stainless steel housing), 1.8m cable length, Available to order in Oak

The luminaire has a fully adjustable arm allowing 360 degree rotation and 0-90 degree rotation. The Euro Twin Pole Light is ideal for path lighting as well as plant. Machined from 45mm thick solid copper or 316 stainless steel, clear tempered glass lenses with high temperature silicon gaskets. Suitable for use with MR11 - 2 x 20 watt lamps. Power Supply: above ground or buriable transformers 20, 50, 100, 150, 200 or 300 watt

IP65 Small Stainless Steel recessed Light with 4 Yellow LED's. For use in decking and in walls. For use with standard transformers

IP65 Small Brass recessed Light with 4 Green LED's. For use in decking and in walls. For use with standard transformers

IP65 Small Brass recessed Light with 4 Yellow LED's. For use in decking and in walls. For use with standard transformers

IP65 Small Brass recessed Light with 4 White LED's. For use in decking and in walls. For use with standard transformers

IP65 Small Brass recessed Light with 4 Red LED's. For use in decking and in walls. For use with standard transformers

IP65 Small Brass recessed Light with 4 Blue LED's.For use in decking and in walls. For use with standard transformers

IP65 Small Stainless Steel recessed Light with 4 Blue LED's. For use in decking and in walls. For use with standard transformers

IP65 Small Stainless Steel recessed Light with 4 Green LED's. For use in decking and in walls. For use with standard transformers

IP65 Small Stainless Steel recessed Light with 4 Red LED's. For use in decking and in walls. For use with standard transformers

IP 67 Groundlight Supplied with 20w MR11 dichroic lamp. Marine grade (316) stainless steel cover. 5mm toughened walk-over glass. Aluminium base. Cable Diameter: 4 - 6.5mm² can be used in conjunction with LED flood/w

IP65 Low Voltage Stainless Steel Walk-over Light, Suitable for use with either MR16 or LED Lamps, Diameter 100mm, Cut out 72mm, Depth 30mm

LED Groundlight, IP68 (approved for permanent use under water) at 1bar (9m of water). Low profile groundlight with 0.25W LED. 45° beam angle. Stainless steel. 5mm toughened walk-over glass. Sealed for life. 3m H05RN-F rubber cable attached. Width 36mm

Low profile groundlight with 1watt Luxeon LED. Antique brass finish. IP68 (approved for permanent use under water) at 1bar (9m of water). 45° beam angle. 5mm toughened walk-over glass sealed for life. 3m H05RN-F rubber cable attached. White LED=30 LUX at 1m. Width 60mm

IP67. 35w Max. G5.3 lampholder. Now with clear and frosted glass. Marine grade (316) Stainless steel cover. 5mm toughened walk-over glass. Aluminium base. Spring clips and removable tube housing. (excellent formwork for stone and concrete environments). Earth terminals and 2 cable glands. Cable diameter: 6.5-13.5mm². Can be used in conjunction with LED Optolamp and LED 3

Low profile ground light with 1w Luxeon LED. IP68 (approved for permanent use under water) at 1bar (9m of water). Marine grade (316) stainless steel. Clear epoxy lenses. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, groundlight or wall light. Suitable for interior, exterior or in submerged locations, width 31mm

Small Diecast Aluminium recessed Light with 6 LED's. Dimension: Diameter 36mm Depth 60mm Cut-out 41mm. For use in decking and in walls. For use with a standard LED Driver

Mini decorative light with 1watt Luxeon LED. Marine grade stainless steel. Clear epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, groundlight or wall light. Suitable for interior, exterior or in submerged locations.

LED Groundlight, IP68 (approved for permanent use under water) at 1bar (9m of water). Low profile groundlight with 1w Luxeon LED. 45° beam angle. Marine grade (316) stainless steel. 5mm toughened walk-over glass. Sealed for life. 3m H05RN-F rubber cable attached. White LED = 30 LUX at 1M, width 60mm

Low profile groundlight with 1w Luxeon LED. Antique brass finish. IP68 (approved for permanent use under water) at 1bar (9m of water). 45° beam angle. 5mm toughened walk-over glass sealed for life. 3m H05RN-F rubber cable attached. White LED=30 LUX at 1M, width 60mm

Low profile groundlights with 1w Luxeon LEDs. IP68 (approved for permanent use under water) at 1bar (9m of water). 45° flood lens. White=65 LUX at 1m. Marine grade (316) stainless steel. 5mm toughened walk-over glass. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable, width 36mm

Low profile groundlights with 1w Luxeon LEDs. IP68 (approved for permanent use under water) at 1bar (9m of water). 12° flood lens. White = 300 LUX at 1m. Marine grade (316) stainless steel5mm toughened walk-over glass. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable, width 36mm

Medium Recessed Light, can come in either Stainless steel or Copper finishes.Dimensions: Diameter 87mm Depth 113mm Cut-out 62mm. Compatible with Low Voltage (IP68 rated - approved for permanent use under water) MR16 (35watt max) or 240volt IP67 rated GU10 (35watt max)

IP68 Rated Walkover Light. Stainless steel bezel. Diecast aluminium body. C/W Inground sleeve. Pre-wired. Diameter 120mm Cut-out 110mm. Compatible with Low Voltage IP68 rated (approved for permanent use under water) MR16 (35watt max) or 240volt IP67 rated GU10 (35watt max)

IP67. 3 x 1watt luxeon LED's. complete with inbuilt power supply. Now with clear and frosted glass. Marine grade (316) Stainless steel cover. 5mm toughened walk-over glass. Aluminium base. Spring clips and removable tube housing. (excellent formwork for stone and concrete environments). Earth terminals and 2 cable glands. Cable diameter: 6.5-13.5mm².

IP67 in-ground fitting. Maximum static load: 2000kg. Maximum drive over speed:15mph. Stainless steel cover ring. 10mm tempered glass. Painted and pre-treated aluminium die cast base. Nylon installation sleeve. Transformer included. Extra gland supplied for through wiring (knock out hole for extra gland) Glass temperature:100degrees C (lamp included)

Grade 315 Stainless Steel Bezel. Integral Driver, IP67 Rated, Available with White or Blue LED's. Dimensions: Diameter 116mm Depth 146mm Cut-out 108mm. Comes complete with 20 inbuilt 2.5watt LED's

IP67 in-ground fitting. Maximum static load: 2000kg Maximum drive over speed: 15mph. Stainless steel cover ring.2 x 50watt Lamps (max). 10mm tempered glass. Painted and pre-treated aluminium die cast base. Nylon installation sleeve. Transformer included. Extra gland supplied for through wiring. (knock out hole for extra gland). Glass temperature: 130 degrees C. (lamps included)

Die cast aluminium spike mounted mini bollard light powder coated in black, MR16 35W max, to be used in conjunction with 12v transformers, Ideal for pathways can be used with LED's

Die cast aluminium spike mounted spotlight powder coated in black, MR16 35W max, to be used in conjunction with 12v transformers

Diecast Aluminium Exterior Spotlight , Low voltage IP68 rated (approved for permanent use under water) pre-wired complete with 600mm flex

Die cast aluminium spike mounted pagoda light powder coated in black, MR16 35W max, to be used in conjunction with 12v transformers, Ideal for pathways borders and flower beds, can be used with LED's

Spike light with 20w Max. Dichroic lamp. 45° Beam angle. Requires 12v transformer. Stainless steel (316) finish 60cm spike also available seperately from supplier

Stainless Steel Exterior Spike Spotlight, IP68 rated. Low Voltage. MAX 35W

IP54 Spike light with 35w Dichroic MR16 lamp, 60cm Marine grade (316) stainless steel spike available seperately, For 12v 35w Dichroic use

Spike light with 1w Luxeon LED 45° Beam angle. Antique brass finish

Spike light with 1w Luxeon LED 45° Beam angle. Stainless steel (316) finish

IP65 Spike light with 1w Luxeon LED, 45° beam angle, Stainless steel finish.

Stainless Steel Spike LED. Spotlight, IP68 rated (approved for permanent use under water). Low Voltage complete with Inbuilt Driver 240V, 2.2W. 15 LED P.C.B. 30,000 hours.

Exterior Spotlight In solid Stainless Steel (SS) and Solid Copper (SC) Low Voltage. IP68 Rated (approved for permanent use under water). MAX 35W.

IP54 Spike mounted Stainless steel SL020, 1 x 5.3 watt LED with a unique colour change system that allows you to pick between 15 different colours , 4 different brightness levels and utilise 4 different colour change programmes (slave unit). Requires LED Driver (requires Tristar remote , sold seperately)

IP54 Spike mounted Stainless steel SL020, 1 x 5.3 watt LED with a unique colour change system that allows you to pick between 15 different colours , 4 different brightness levels and utilise 4 different colour change programmes (Master unit). Requires LED Driver (requires Tristar remote , sold seperately)

Single bracket for MS02/MF02

Die cast aluminium powder coated wall mounted marker and pathway light with a hooded glare guard, 35W max.

Die cast aluminium powder coated wall mounted pathway light with a louvre glare guard, 35W max.

IP68 Die-cast aluminium powder coated wall mounted light with a louvre glare guard, 35W max MR16 or LED lamps. Suitable for use underwater

Low profile wall mounted or ground light with 1w Luxeon LED. IP68 at 1 bar(9m of water). Marine grade (316) stainless steel. Clear epoxy lenses. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, groundlight or wall light. Suitable for interior, exterior or in submerged locations, width 31mm

Mini decorative light with 1watt Luxeon red LED. Aluminium, frosted epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, markerlight or wall light. Suitable for interior, exterior or in semi submerged locations.

Mini decorative light with 1watt Luxeon white LED. Aluminium, frosted epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, markerlight or wall light. Suitable for interior, exterior or in semi submerged locations.

Mini decorative light with 1watt Luxeon blue LED. Aluminium, frosted epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, markerlight or wall light. Suitable for interior, exterior or in semi submerged locations.

Mini decorative light with 1watt Luxeon green LED. Aluminium, frosted epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, markerlight or wall light. Suitable for interior, exterior or in semi submerged locations.

IP67 mini wall light made from stainless steel with a 1 watt luxeon spotlight, requires an LED driver and WB/M 01 bracket (sold seperately)

IP67 mini wall light made from stainless steel with a 1 watt luxeon floodlight, requires an LED driver (sold seperately)

Mini square decorative light with 1watt Luxeon white LED. Aluminium, Supplied with 1.5m 0.35mm red and black teflon cable.markerlight or wall light. Suitable for interior, exterior downlighting

Mini square decorative light with 1watt Luxeon green LED. Aluminium, Supplied with 1.5m 0.35mm red and black teflon cable.markerlight or wall light. Suitable for interior, exterior downlighting

Mini square decorative light with 1watt Luxeon red LED. Aluminium, Supplied with 1.5m 0.35mm red and black teflon cable. Markerlight or wall light. Suitable for interior, exterior downlighting

Mini square decorative light with 1watt Luxeon blue LED. Aluminium, Supplied with 1.5m 0.35mm red and black teflon cable.markerlight or wall light. Suitable for interior, exterior downlighting

IP65 Wall mount version of the Stainless steel SL020, 12v 35w dichroic lamp included. Requires transformer

Mini decorative light with 1watt Luxeon LED. Marine grade stainless steel. Clear epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, groundlight or wall light. Suitable for interior, exterior or in submerged locations.

Mini decorative light with 1watt Luxeon blue LED. Aluminium, frosted epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, markerlight or wall light. Suitable for interior, exterior or in semi submerged locations.

Mini decorative light with 1watt Luxeon red LED. Aluminium, frosted epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, markerlight or wall light. Suitable for interior, exterior or in semi submerged locations.

Mini decorative light with 1watt Luxeon white LED. Aluminium, frosted epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, markerlight or wall light. Suitable for interior, exterior or in semi submerged locations.

Mini decorative light with 1watt Luxeon green LED. Aluminium, frosted epoxy lens. Sealed for life. Supplied with 1m 0.35mm red and black teflon cable. Use as step light, markerlight or wall light. Suitable for interior, exterior or in semi submerged locations.

IP68 Stainless Steel or Copper Wall light, MAX 35W dichloric MR16 lamp. Depth 73mm Diameter 62mm

IP68 , Wall mounted spotlight, MAX 35W dichloric MR16 lamp, available in stainless steel or solid copper

Mini square decorative light with 2x1watt Luxeon white LED. Aluminium, Supplied with 1.5m 0.35mm red and black teflon cable.markerlight or wall light. Suitable for interior, exterior downlighting

Mini square decorative light with 2x1watt Luxeon green LED. Aluminium, Supplied with 1.5m 0.35mm red and black teflon cable.markerlight or wall light. Suitable for interior, exterior downlighting

Mini square decorative light with 2x1watt Luxeon blue LED. Aluminium, Supplied with 1.5m 0.35mm red and black teflon cable.markerlight or wall light. Suitable for interior, exterior downlighting

Mini square decorative light with 2x1watt Luxeon red LED. Aluminium, Supplied with 1.5m 0.35mm red and black teflon cable.markerlight or wall light. Suitable for interior, exterior downlighting

IP54, Wall mounted up & down light for 2 x 20w MR11, Supplied with teflon termination cable, Marine grade (316) stainless steel, 12v transformer required, 20w Max.

IP54 Wall mount version of the Stainless steel SL020, 12v 3 x 1watt luxeon high powered LED lamps built into a MR16 type fitting. Requires LED Driver

IP54 Wall mount version of the Stainless steel SL020, 1 x 5.3 watt LED with a unique colour change system that allows you to pick between 15 different colours , 4 different brightness levels and utilise 4 different colour change programmes (Slave unit). Requires LED Driver (requires Tristar remote and master unit, sold seperately)

IP54 Wall mount version of the Stainless steel SL020, 1 x 5.3 watt LED with a unique colour change system that allows you to pick between 15 different colours , 4 different brightness levels and utilise 4 different colour change programmes (Master unit). Requires LED Driver (requires Tristar remote , sold separately)

IP67 Rotatable octagonal LED anodised wall light complete with bespoke wall fixings for easy installations, 4 lenses direct the 1watt LED's to your desired angle, fitting diameter 100mm fitting depth 38mm (Blue)

IP67 Rotatable octagonal LED anodised wall light complete with bespoke wall fixings for easy installations, 4 lenses direct the 1watt LED's to your desired angle, fitting diameter 100mm fitting depth 38mm (Red)

IP67 Rotatable octagonal LED anodised wall light complete with bespoke wall fixings for easy installations, 4 lenses direct the 1watt LED's to your desired angle, fitting diameter 100mm fitting depth 38mm (Green)

IP67 Rotatable octagonal LED anodised wall light complete with bespoke wall fixings for easy installations, 4 lenses direct the 1watt LED's to your desired angle, fitting diameter 100mm fitting depth 38mm (White)

4mm MDPE tubing for use with octimitters,ideal for hanging baskets,pots and greenhouses, sold per meter

Small stake mounted dripper that can be adjusted from 0-40 ltr./hr Ideal for narrow beds, pots, tubs, rockeries, hanging baskets. For use with 4mm FR39 piping, sold separately (see Accessories)

Dripline with 300mm spaced filtered outlets suitable for large and small borders. Very versatile and is preferable for shrubs and roses. Water is directed to the roots.(Sold in 100mtr coils)

Simple, flexible & reliable battery operated single zone controllers, with 3/4" inlet and control valve

2x T15 wedge 12V/10W light bulbs

2x T15 wedge 12V/7W light bulbs

2x T15 wedge 12V/5W light bulbs

2x JC 12V/20W halogen lamps. G4 socket

2x JC 12V/5W halogen lamps. G4 socket

Halogen lamp, MR16, 12V 10W

2x JC 12V/10W halogen lamps. G4 socket

2x Halogen lamps. MR11, 12V 10W

LED White G4. 12V 1W

LED lamp, MR16, 12V 2.3W

LED lamp, MR16, 12V 2.3W

This Aluminium bollard comes in a silver finish with a square water resistant glass top. It is ideally suited to pathways, decking and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This Aluminium bollard has a torch type effect with a glass filament and has a silver finish. It is ideally suited to pathways and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This circular stainless steel bollard has a water resistant glass top. It is ideally suited to pathways, decking and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This Aluminium bollard has a torch type effect with a glass filament and has a silver finish. It is ideally suited to pathways and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This acrylic metal, Aluminium decorative twin light set comprises of two glass lights mounted on different length silver effect poles. They are ideally suited to pathways, decking and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This Stainless steel bollard has a square water resistant glass top. It is ideally suited to pathways, decking and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This Aluminium decorative twin light set comprises of two glass lights mounted on different length silver effect poles. They are ideally suited to pathways, decking and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This Aluminium bollard comes in a silver finish with a square water resistant glass top. It is ideally suited to pathways, decking and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This modern Aluminium bollard has a curved slimline appearance. Featuring 16 LED lamps with a grid finish.It is ideally suited to pathways, decking and in between low border planting. Both spike and mounting base are provided. This product comes complete with:

This Aluminium bollard comes in a anthracite finish with a square water resistant glass insert. It is ideally suited to pathways, decking and in between low border planting. Both spike and mounting base are provided. This product comes complete with: